How to Clean Broken Glass Out of Your Carpet (You Can Buy Everything You Need at a Carpet Store in Fort Worth)

When broken glass falls on your carpeting, try to get the pieces out rapidly quickly to eliminate spreading the bits over the other areas. With assistance from a few tools, as well as a durable vacuum cleaner (you can get at a carpet store in Fort Worth), you can eliminate the risk of scrapes and cuts to your pets and loved ones. If you have small children, you don’t want them picking up slivers of glass and putting them in his or her mouth.

Begin the job with your vacuum cleaner purchased from a carpet store in Fort Worth

A strong vacuum cleaner can suck up the shards you see, as well as take out the ones you can’t. To get rid of broken fluorescent light bulbs (which have mercury) in your carpet, you’ll need to pick up the pieces by hand and put the fragments in a lidded container.

carpet store in Fort Worth has the tools for broken glass

Tips on how to handle broken glass in your carpet

Make sure you’re wearing the right protection for your feet and hands. Wear gloves and close-toed shoes.

Cautiously remove big visible chunks of glass. Just because you can’t see any glass in your carpeting, doesn’t mean it’s all gone. Throw the glass away in your outdoor garage can so no one is hurt by it.

Vacuum and vacuum again

Vacuum the area completely, going over it many times to make sure you get rid of as much of the glass as you can. After vacuuming, scour the area with a brush, bringing any glass to the surface that could be deeper in the carpet. You can also use a piece of bread or duct tape to help pick up any chunks.

Vacuum once more, this time aiming for the bigger area around the spot where the accident occurred. You want to make sure that any abandoned pieces are retrieved, so no one accidentally steps on them later. Even if your carpeting appears clean and glass-free, glass very well could be still there. Therefore, a thorough vacuuming is necessary.

It is an excellent idea to vacuum the area each day for a week after you clean up. You want to be sure that all the glass is gone.

What Glass Art is All About

Gone are the days when glassblowing and glass art were equal. Now, there are numerous approaches and techniques to working with glass as an art medium. A couple of definitions may be helpful to you if you are somewhat new to the world of modern glass art.

BLOWN GLASS: The most traditional and oldest method for working with glass is glassblowing. This entails heating

Glassblower Making a Sphere

glass in a furnace, collecting some molten glass on the end of a blowpipe and blowing a bubble of glass. Glassblowing can result in something as easy as a Christmas tree ornament or as complex as a masterpiece by famed Lino Tagliapietra. The names of a few celebrated artists who use glassblowing as their primary method are Dan Dailey, Dale Chihuly, Marvin Lipofsky, Dante Marioni, Lino Tagliapietra, and William Morris.

CAST GLASS: Casting glass entails melting glass in a furnace and pouring it into a made up form. Molten glass can be poured into a clay, plaster, or clay mold. Also, molds are at times used in glassblowing, particularly in production pieces. A few famous artists who use glass casting as their primary method are Daniel Clayman, Alex Bernstein, Charles Miner, Steven Weinberg, and Robin Grebe.

COLD GLASS/FABRICATED GLASS: To state the obvious, cold glass working does not involve heat. A glass artist using cold glass methods may laminate, with high tech glue, two or more pieces of glass together. This is the most common technique for cold glass working. There are some artists who actually begin with a piece of solid glass and carve it into its final form using diamond saw cutting, hand tool cutting, and sandblasting. A few of the well-known glass artists using cold glass methods are Christopher Ries, Martin Rosol, and Jon Kuhn.

Is Microwaving Food in Plastic Bowls Safe?

Let’s deal with the first half-truth here: The primary notifications cautioned that microwaved plastic discharges cancer-causing chemicals (dioxins) into food. The issue with that warning is that plastic doesn’t have dioxins. They are formed when plastics, wood, metals, garbage and other materials are burned. The truth is if you don’t burn your food in a microwave, you aren’t subjecting your food to dioxins.

There’s no single substance named “plastic.” That term covers several materials crafted from a number of inorganic or organic compounds. Substances are frequently added to plastic to aid in stabilizing or shaping it. Two of these plasticizers are:

Phthalates which is added to make plastic flexible and soft

Bisphenol-A (BPA) which is added to make hard and clear plastic

Phthalates and BPA are thought to be endocrine disrupters. These are elements that mimic human hormones and not in a good way.

When food is covered in plastic or in a plastic container and microwaved, phthalates and BPA could get into the food. Any leak is going to be greater with fatty foods like cheeses and meats.

Is Styrofoam microwave safe?

Opposite to popular belief, some Styrofoam containers can be safely used in the microwave. Just obey the same rule you would when you use other sort of containers in the microwave: Read the label!

If you’re worried about plastic containers or plastics in the microwave, put food in ceramic or glass container that can be used in microwave ovens.

Don’t allow the plastic wrap to touch your food during microwaving because it could melt. Parchment paper, paper towels, a microwave cover, or wax paper that fits over your bowl or plate are better substitutes.

Takeout/plastic containers, tubs or jars that held yogurt, whipped topping, butter, mayo, and other foods aren’t microwave-safe.

Are Glass Baby Bottles Really Better For Your Little One?

Buying baby bottles is a harder task than it seems. There are a wide range of choices, including the infamous glass baby bottles. How are you supposed to understand if these are best?

Below are the pros and cons of glass bottles so you can make a smart decision on if they’re best for your baby.

Glass Bottle Pros:

Chemical-Free: It is a unquestionable that glass bottles are chemical-free, and there’s no need to worry about chemicals getting into the milk/formula.

Simpler to clean: Glass bottles are much, much easier to clean than plastic since they are less likely to get scratches and retain odors and residue. Small scratches, which plastic is famous for, make minute spaces for bacteria to grow. It’s also very easy to tell when glass is clean vs. dirty unlike plastic.

Sanitizing: You can heat up glass to high temperatures without having to be scared about it melting. So you can really sanitize your bottles.

Tastes better: Plastic bottles absorb numerous scents, tastes, and odors into formula or breastmilk. On the other hand, glass seals in the purity of taste of its liquids.

Durable: Glass bottles are way more sturdy than plastic ones. Unless they happen to break, your glass bottles can last through many newborns.

Glass Bottle Cons:

More expensive: Glass bottles are more expensive since the material is pricier and the method of producing them is more time consuming.

Not readily available: You most likely won’t be able to find any glass bottles at your nearby discount store. You will have to go to a nearby health food store or order off of the web.

Fewer choices: There aren’t quite as many choices for glass bottles as there for plastic. But there are still a real good variety available on the web. Well-known ones online are Avent, HEVEA, Evenflo, Lifefactory, and Dr. Brown’s.

Heavy: Glass bottles usually are on the heavy side which can make it hard for your baby to grasp.

Using Glass Block to Remodel Your Bathroom

Putting glass blocks in your remodeling project will enrich the beauty of your bathroom and improve the resale value of your house even more. Glass blocks come in an assortment of patterns and choices to satisfy your specific architectural style. The proper mortar delivers accurate waterproofing in a wet environment.

Glass blocks have always been the best in custom building, bringing aesthetic appeal to your residence. They can be patterned, colored, or clear. Also, they can be used for landscaping, flooring, and can even be illuminated.

New houses are now being constructed with huge master baths that will contain a huge doorless shower. However, these days, we are staying put and renovating our current residences which may not have room for a large shower. A doorless glass block shower is a must-have feature. The glass block offers privacy and light you won’t get with ordinary glass shower doors. The added advantage of not having to clean a shower glass door is the dream of every homeowner. Check out your glass block choices of square corners or round corners for your shower according to the layout and size of your master bathroom.

Another alternative is to switch your bathroom window with glass blocks to liven up the room and let you do away with those blinds and curtains. There are many colors and patterns to pick from to show your home’s personality.

An additional advantage of glass blocks is that they offer security to your residence since most bathroom windows don’t have an alarm sensor on them. Adding glass block windows in your garage will bring your garage more security and light.

Getting rid of your old window and putting in glass blocks is done without any changes to the surrounding area on the outside and can be done in one day.

 

 

How to Paint Glass Vases

Who doesn’t own plain glass vases left over from a few bouquets?  I know I have a difficult time throwing them out. If you are like me, you probably have a cabinet full of them. If you are wondering what to do with them, paint them!

You can quickly paint three vases under 60 minutes and this includes drying time. Get your paint, get your vases, and get started.

Supplies for Painted Glass Vases

  • Clear glass vases (if you don’t have any, an arts and crafts store sells them cheap)
  • Craft paint that works on glass (Martha Stewart multi-surface acrylic craft paint is a solid choice because it doesn’t make you bake the glass in the oven like most other glass paints)
  • Small paint brushes
  • Rubbing alcohol
  • Your imagination and fingers

Who doesn’t want to do a project with a variety of colorful paints?  Let your imagination and creativeness roam free.

How to Paint Glass Vases

Start by thoroughly washing the vases in good hot, soapy water. Rinse them and pour a small amount of alcohol inside, either swishing it around or rubbing it around the inside. Turn upside down and let them completely dry. This guarantees that the paint will adhere to the vase.

Squeeze a good amount of paint into the bottom of the vase and use a brush to spread it on the sides. Remember, you’re only painting the inside of the glass vase.

If you need more paint, add more so that the insides are totally covered. Once you begin making streaky brush strokes as if you’re pushing around paint, this is a good time to stop.

You may or may not need a second coat once the paint has completely dried. If you need a second coat, wait a day before doing so.

That’s it! You can either keep them or give them away as presents!

Glass Kitchen Appliances

Looking for new kitchen appliance, I saw glass kitchen appliances made with colored glass. It caught my eye and when I asked some representatives from various manufacturers, I was told that it’s a popular choice for European consumers.

Refrigerator with a glass door

I know what you’re saying to yourself. “Glass? It won’t work. It’ll break too easily!” Manufacturers have taken this into account. There was a test booth (in case you are a “show me” type of person) where you can take a frying pan or wine bottle and bounce it off of a glass refrigerator door.

You will see that it won’t have a crack or scratch on it. This isn’t your usual window pane. While I wasn’t inform as to how stress-proof this particular grade of glass is, I was assured that it’s been through high rigorous tests in order to withstand the wear and tear of busy everyday living.

With Whirlpool’s new White Ice look, you may think there are already glass finishes in the US. That’s not really true. White Ice is just a metal finish that has been painted to make a new color while keeping the satiny texture of stainless. Attractive as it may be, it’s a multi-layer finish that if scratched deep enough, can damage. Glass, on the other hand, is very easy to clean and doesn’t rust.

Glass finishes take the top qualities of stainless steel (polished and smooth) and remove all the negative elements (no warmth, its easily-smudged surface, and flashbacks of the cheaply built McMansions so ordinary during the housing bubble. It’s also is an alternative to the glossy black and white or textured finishes that serve as the only two well-known alternatives to stainless, which doesn’t really give the smooth look that so many customers seem to prefer.

Glass unites a top texture with personality and pizzazz, making a kitchen that displays whatever sort of life style you want to project just as completely as the other rooms in your house.

Can You Really Wear Glass Shoes?

For any woman who has wanted her very own fairy tale ending, for her Prince Charming to come and sweep her off your feet and take her away to his kingdom, or if she just wondered what it would be like to wear shoes made of a material that could possibly shatter and cut her feet to bits, well then these real glass, Cinderella-inspired slippers are just what she’s been searching for!

These glass slippers are hand-made from blown glass by skilled artisans. Believe it or not, these talented craftsmen are capable of making these minus the use of any cutting or molds. It’s said that the technique has taken close to eight years to perfect.

Sizes can be custom ordered. High-end glass shoes aren’t crafted in pairs. Nonetheless, each one can be worn on either foot.

While these shoes unfortunately aren’t sold in pairs, each one is made to be wearable on either foot. Your Cinderella footwear will only cost you around $800 per shoe. You might be in the poor house, but at least your feet will look marvelous!

Now you can stop waiting around for Prince Charming to come with a glass shoe and go out and get your own. You can be a princess on your own terms.

Inspired by the Cinderella story, major shoe designers have taken to making their own version of Cinderella’s footwear.

JIMMY CHOO, $5,000 per shoe

Jimmy Choo’s creative director, Sandra Choi: “I think every female want a Cinderella moment in her life. This story starts a love affair and enchantment with shoes that won’t die. The power shoes have to change is taught from a young age and the dream will still live on. We wanted to create a shoe that is magical, possessing glamorous sparkle and a timeless, feminine silhouette conjuring up those childhood feelings.”

Tonelli Glass Furnishings

Tonelli is the top name in Italian glass furniture. Over the past 25 years, they have become skilled at taking fine precision cuts of thick glass and using a UV bonding process to fabricate visually stunning, innovative tables. Tonelli worked with several well-known designers like Isao Hosoe, G. Tommaso Garattoni, and Karim Rashid to satisfy the potential of the technology and craft contemporary design works of genius.

The appeal and popularity of glass furniture has increased, as it goes with an assortment of interior design patterns, won’t look outdated as numerous other materials will and the location of well-made pieces of glass furniture can give the same use without cramping or cluttering the view of space in a room.

Tonelli Fragments Glass Table

The variety of Tonelli glass furniture is dining tables, coffee tables, cabinets, bookcases, desks, mirrors, and consoles. If you don’t see a product on their website, contact them as they are famous for custom-crafting furniture pieces.

Established in the 80s, Tonelli is a truth the world of design refers to, the best in building of glass furniture and complements.

Their belief is based on a mixture of innovation and tradition, critical element that when united with the love for this amazing material, helps to promote the glass furniture culture.

FYI: Glass is more liquid than solid.

Truthfully, the physical structure offers more parallels to the molecular structure of liquids than that of the crystalline structure of solids. Only the high viscosity differentiating it stops its particles from sliding on one another.

At rising heat, opposite to what happens with metals that at a precise temperature freezes or melts, glass goes through various stages of malleability, gradually softening till becoming malleable and have the characteristics needed for the function it’s meant to perform.

Sturdy, safe, and resistant, glass can be of many thicknesses, from 12-15-20mm for supporting structures to 6-8-10 for tops and doors.

 

What is Shatterproof Glass and Why Would You Need It?

What is shatterproof glass and what makes it different? Glass that is shatterproof is made with plates of plastic or resin between two sheets of glass to prevent shattering. These windows are a little more expensive, but there are reasons to consider using them.

Break-ins, unfortunately, are a reality especially if you live in a high crime area. Homeowners need to take the measures necessary to protect their home and family, and shatterproof glass is a good start. Shatterproof windows are a huge deterrent when a burglar is attempting to break into a home.

Unlike traditional windows, shatterproof windows prevent burglars from smashing exterior windows and gaining easy access to homes. The glass cracks, but doesn’t break open, and the burglar will have no choice but to move on.

In addition to smash-and-grab break-ins, traditional windows also leave you vulnerable to accidents. Kids can break your window while playing baseball or if a piece of furniture falls on a window – because traditional windows can easily be broken by objects at high velocity or by brute force. Fortunately, shatterproof windows offer homeowners a degree of confidence in their home. The ability to withstand brute force exists because a strong polymer interlayer is often placed between two sheets of glass, which strengthens the glass against breakage.

If you live in an area prone to tornados or hurricanes, installing shatterproof windows will provide a lot of reinforcement from weather-related protections. Many shatterproof windows can withstand impact that’s the equivalent of a 2×4 flying at your window at 50 feet per second.

Shatterproof glass can also be tinted, which helps you protect your home from natural light entering your home. Although natural light can help you lower costs during the day by reducing your use of electricity, natural light can lead to increased air conditioner use during the summer. With tinted windows installed in your home, you can reduce the need for air conditioning during summer months.

Homeowner’s insurance is necessary when you have a home. With the right homeowner’s insurance, you don’t need to worry about weather-related damage to your home. Some homeowner’s insurance policies will give homeowners a discount when they purchase shatterproof glass. With shatterproof glass effectively protecting your home from so many potential losses, insurance companies are eager to offer you incentive to install these windows in your home.

So, when you are in the market to replace your windows, you should ask about shatterproof glass.